基于地质雷达与孔内摄像的爆破防漏施工方法

为了解决在裂隙溶洞岩体条件下,散装炸药由于良好的流动性,容易发生炸药泄漏,形成安全隐患并影响爆破效果的问题。结合具有典型喀斯特地貌特征的贵阳龙洞堡机场三期扩建工程中露天爆破施工的实际情况,以检测数据为基础,提出了一种适用于不良地质条件的散装炸药施工新方法。设计前,对爆区采用地质雷达进行地质检测,探测地下溶洞等不良构造,基于探测数据有针对性的进行爆破设计;使用孔内摄像技术对炮孔内部条件进行检测,从而确定可能发生炸药泄漏的位置。在施工过程中,采用分段装药、包装炸药隔离、高强度聚乙烯膜柔性隔离等技术控制炸药泄漏。在龙洞堡机场扩建工程的露天爆破中应用结果表明,合理运用该技术,可以有效避免混装炸药因泄漏而流失,从而改善裂隙岩体条件的爆破效果。     

Plastic-containing materials as alternative reductants for base metal production

Shredder residue materials are produced after the removal of ferrous and non-ferrous fractions from end-of-life electronic equipment. Despite the high plastic content and metal value in the ash, high percentages of these materials are currently sent to landfills. In this study, the potential of utilising shredder residue material and other plastic-containing materials as reducing agents was studied. Plastic-containing materials were co-injected with coal into a zinc-fuming furnace in Boliden-Rönnskär smelter. The data obtained from the trial, such as the data from the chemical analysis of the slag and the steam production, are discussed. The observations indicate that plastic-containing material can replace up to 1?ton?h^?1 of coal without a significant decrease in the zinc reduction rate.     

乙二醇高温还原制备燃料电池核壳结构Cu@Pt-Pd电极的研究

通过对以碳为核心的燃料电池电催化剂Cu@Pt-Pd的制备方法的研究,以还原法成功将Cu、Pt、Pd还原到了靶核C上制备出了核壳结构电催化剂Cu@Pt-Pd。该催化剂以Cu为核来提升催化剂的表面积比,同时掺杂金属Pd,降低贵金属铂的使用量,在提高催化效率的同时可以降低成本。经过对所制备的催化剂的XRD和CV的测试与分析,探究出制备的成品具有一定的提升氧化还原反应的催化效率的能力,同时该制备方法简单易于操作,利于大量制备。     

磁铁尾矿与石灰石双掺生产优质水泥

受环保压力影响，西乡公司生产水泥用河道淤沙供应紧张，难以满足生产需求且价格上涨幅度较大，严重影响到水泥生产及成本，我们开展了磁铁尾矿在水泥中的应用研究工作，通过连续几个月的生产实践，对物料配比优化，磨机技术改造，实现利用磁铁尾矿与石灰石双掺解决混合材紧缺问题，降低了水泥生产成本，水泥质量及性能稳定。     

Sintering mechanism of high-intensity and low-density ceramic proppants prepared by recycling of waste ceramic sands

Waste ceramic sands were effectively used to prepare the high-intensity and low-density ceramic proppants, realising the recycling of the waste ceramic sands. The technology involved the pelletising in an intensive mixer, in which the waste ceramic sands and other starting materials were added, and followed by heat-treatment under different sintering conditions. The sintering temperature, holding time and heating rate were optimised by investigating the crystalline phase, microstructure, density and breakage ratio of the obtained proppants. The results showed that the proppants sintered at 1260°C for 2?h with a heating rate of 5°C?min^–1 under air atmosphere exhibited high crush resistance and low density, with the breakage ratio of 8.5% under 52?MPa closure pressure and bulk density of 1.65?g?cm^–3. The proppants prepared by bauxite, waste ceramic sands and sintering aids are promising candidates as high-intensity and low-density fracturing proppants in future applications.     

物质平衡-拟压力近似条件法确定气藏储量

物质平衡法作为一种有效的手段被广泛应用于气藏储量或井控储量的确定。为简便准确地确定气藏储量，笔者从物质平衡原理出发导出了"物质平衡条件"，求解气体渗流数学模型，得到了"拟压力近似条件"。将二者结合，提出了"物质平衡-拟压力近似条件法"（MB-QAC方法）。利用该方法，通过边界控制流阶段（产量波动相较于边界作用可忽略）的生产数据便可准确地计算气藏储量。定产量、定流压以及复杂生产计划条件下的数值模拟数据以及气藏实例验证了其有效性。在生产数据记录可靠的条件下，储量计算误差一般小于5%。同时，数值模拟结果表明，动态物质平衡方程是一种近似关系，拟压力近似条件对于模拟的各种情形均成立。由于考虑了岩石和束缚水的压缩性、气井产量的波动和气体性质的变化，MB-QAC方法具有一定的理论基础，对于异常高压和正常压力系统的气藏均适用，但不适用于水体活跃的气藏。     

Development of a void ratio-moisture ratio-net stress framework for the prediction of the volumetric behavior of unsaturated granular materials

Despite extensive research on the behavior of unsaturated fine-grained materials, there is still a lack of understanding of the volumetric behavior of unsaturated granular materials. In this research, a model has been developed to predict the fundamental volumetric behavior of unsaturated granular materials through loading and wetting state paths. In this regard, a loading-wetting surface was developed in a space of void ratio-moisture ratio-net stress. A distinctive feature of the proposed model is the relative simplicity in obtaining the model parameters using conventional geotechnical testing equipment. Two types of recycled granular materials, commonly applied in unbound pavements were used, namely, recycled crushed brick (CB) and excavation waste rock (WR). The uniqueness of the developed surface was evaluated by employing a number of loading and wetting state paths. The results indicate that the developed surface is unique in its loading state paths; however, it only shows uniqueness in its wetting state paths for stress levels greater than 2000 kPa. The proposed model seeks to introduce the application of the unsaturated soil mechanics theory, for predicting the behavior of granular materials in the field, by providing a practical and cost-effective methodology.     

镍基MOF电极材料物理超声改性及电化学性能

采用水热法合成了以4,4′-联苯二甲酸(BPDC)为配体的Ni-金属有机框架(MOF),利用低成本、无污染的物理超声法在不改变Ni-MOF晶体结构的前提下对其进行改性,使块状Ni-MOF表面产生孔隙,改善Ni-MOF表面微/纳米结构,提高其电化学性能。通过扫描电子显微镜(SEM)图、X射线衍射(XRD)谱、循环伏安(CV)曲线和恒电流充放电(GCD)曲线分析了改性前后Ni-MOF的微结构形貌和电化学性能。结果表明,经过超声处理后,Ni-MOF的比表面积从40.6 m^2·g^-1增加到65.8 m^2·g^-1,平均孔径从12 nm增加到22 nm。在0.5 A·g^-1电流密度下,超声处理后Ni-MOF电极比电容从420 F·g^-1增加到515 F·g^-1,提高了22.6%,电荷转移电阻明显降低,从25.11Ω降低到15.51Ω。因此,物理超声法可有效改善Ni-MOF表面微/纳米结构,提高其电化学性能。     

Mechanical Properties of an Fe‐Based SAM2×5‐630 Metallic Glass Matrix Composite with Tungsten Particle Additions

We present the role of tungsten additions on the mechanical properties of a Fe‐based structural amorphous metal (SAM2×5‐630) containing crystalline tungsten. Matrix cracking by microindentation is inhibited by the addition of tungsten and indicates that tungsten improves the fracture toughness. Response surfaces from nanoindentation arrays indicate that the hardness and modulus of the matrix phase are increased by tungsten additions. Bulk composites with 30 vol% tungsten subjected to 4‐point flexure exhibited brittle fracture behavior and the characteristic strength and Weibull modulus were 165 and 8.7 MPa, respectively. The addition of tungsten did not cause devitrification of the matrix phase.